Our devices

Outdoor Co2 sensors

The CO2 detector measures and records environmental values such as temperature, relative humidity, brightness, CO2 and TVOC concentration levels.

We are one of the first companies to have installed such sensors in cities, towns and villages.

Indoor Co2 sensors

The CO2 detector monitors air quality in enclosed spaces.

Outdoor Particulates Sensor

This device monitors the percentage of particulates in open spaces, especially in traffic-heavy areas.

Two-Way Access Counter

This device counts the number of people’s entrances and exits in a specific place.

IoT Device for Waste Level Measurement

This device detects the level of waste in containers, from urban trash cans to containers for the separate waste collection.

It fits containers of different shapes and dimension, and it can work with different types of waste (plastic, paper, glass, organic waste).

It uses LoRaWan technology to communicate, and it is linked to our platform that collects and analyses both monitoring data and information about the proper operation of the different devices.

Collected data are then analyzed with our Machine Learning system, for example to optimize the waste collection route according to empty and full containers.

Having everything integrated in a single platform is a major strong point.

IoT Device for Customer Satisfaction Measurement

Moodbox is a terminal with different buttons that collects feedback from users and can be employed in different situations.

It communicates via LoRaWan technology, and it is linked to our platform that collects and analyses both monitoring data, and information about the proper operation of the different devices.

Collected data are then analyzed with our Machine Learning system, that can for example cross-check feedback from the users with data coming from other sensors such as access counting systems.

Having everything integrated in a single platform is a major strong point.

Wildfire Detection Sensor

This sensor is designed to measure carbon dioxide (CO2) gas concentration in harsh environments.

Measuring ranges from 400ppm to 5000ppm

Easy installation in any enclosed areas or outdoors

4 in 1 (CO2, barometric pressure, humidity, temperature).

Smart Wine Cellar

Carbon dioxide is a by-product produced during the fermentation of wine. As the density of carbon dioxide is heavier than air, it is likely to overflow from the fermentation tank. When it falls on the ground of the winery, it will form fatal and undetectable potholes, which will bring great hidden danger to the safety of the operators.

Wildfire Detection

These days, wildfires often cause serious threats to the environment and generate real emergency situations and natural disasters. In most cases, when someone notices the fire, it is too late because the fire has already spread. Wildfire detection can be improved with the use of CO2 (carbon dioxide) monitoring systems.

Class 1 Sound Level Sensor

Class 1 measurement accuracy according to IEC 61672-1
LAeq 1min/1s
Uninterrupted 24/7 measurement
Communication via LoraWan
Battery powering also available
Protection against external agents with IP65 outdoor kit
Light weighted, small sized, and easy to install

Gateway with solar panels

This is a highly energy-efficient LoRaWAN® solar gateway, designed for outdoor usage, with integrated batteries and solar panel (included).

It can work independently, especially in places where access to energy resources is difficult.

Its case is IP67 resistant.

It supports 8 channels, allowing for more than 2,000 connections of end-nodes.

It is equipped with a GPS, facilitating management and remote implementation.

LoRaWan Camera with integrated AI Video Analysis

Frame high frequency = 100 fps
It provides highly detailed color images, even in poor lighting conditions, as low as 0.005Lux
Excellent performance even when the clear/dark brightness ratio is up to 140 dB
Improves image visibility under strong light sources
Restores clear images in foggy weather
8 smart VCA modes are powered by the AI motor; they can filter/exclude objects to focus on detecting people and vehicles
The people-counting technology provides high-precision, real time data with statistical reports processed with the help of an AI algorithm

Brightness sensor for public lighting optimization

This light sensor is designed for ambient light intensity detection in harsh environments. It is useful in many applications, such as brightness control, horticulture, floriculture and so on.
Measuring ranges from 0 to 100,000 lux.
1-second fast response
10-year battery life with low maintenance cost
Accurately detects any light changes

Lorawan Emergency Lights

They run recurring self-tests and send detailed reports.

Reduction of operational costs for monitoring and planned maintenance (except for visual inspection, to be carried out on site).

Centralized management of emergency lights and of other devices.

Compliant with the following standards:

D. Lgs. April 09, 2008, No. 81
M.D. 01/09/2021 and 02/09/2021
IEC EN 50172
UNI CEI 11222

Smart water meters

STRONG POINTS

the installed devices integrate with the existing meters and read their impulses, so you don’t need to replace any meter
resistant to extreme usage conditions
support both LoRaWan and NB-IoT technology
linked to a cloud platform that can be integrated with any other platform/system
ensure higher consumption monitoring, thus prompting action to reduce wasted consumption

CASES OF USE.

Radio module for remote reading of water, gas, electricity and heat meters
Measurement range from 0 to 100,000 lux
1-second rapid response
10-year battery life with low maintenance cost

Capacity level sensor

It offers energy-saving features that extend the battery life up to 10 years and can be seamlessly integrated with containers of different shapes and sizes.

It monitors hand soap levels.

-Non-contact capacitive sensing

-Reliable accuracy with strong anti-interference ability

-Outstanding IP67-rated waterproof performance

-Flexible and easy installation

-10-years battery life.

Industrial temperature sensor

The platinum resistance thermometer ensures a much more stable and accurate measurement of the temperature, ranging from -50 to 200 ° C. Its 19000 mAh high-capacity, incorporated battery can be used for 10 years.

FEATURES

Class A OTAA / ABP mode
EM500-PT100-T200 temperature measurement range: from -50 ° C to +200 ° C, ± 0,5% precision
Type of probe: straight tube
Power supply: 19000 mAh Li-SOCL2 battery
Operating temperature: from -30 ° C to + 70 ° C
Input protection degree: IP66 (IP67 on demand)
Size: 105.4 × 71 × 69.5 mm
DIN rail, wall mounting, pole mounting

Tracker

Smart, wireless LoRaWAN tracker with low energy consumption, for both indoor and outdoor use. GPS, Bluetooth, and WiFi positioning are integrated, and the tracker supports different operating modes, suiting most tracking applications. It supports ABP and OTAA, two different access modes to the LoRaWAN network. Configuration and firmware updating are easily performed with the MKLoRa APP. It is ideal to enhance logistics, resource management, warehouse and inventory operations, outdoor locationing, theft protection, livestock tracking, and much more.

FEATURES:

Protocol: LoRa LoRaWAN V1.0.3
Frequency: Lora EU868
Power: Tx Max 20dBm
Sensitivity: -137dBm @ SF12 300bps
LoRa communication distance: up to 7 km (in open urban spaces)
Size: 122mm×72mm×33mm (±2mm)
About 10000 mAH available (12000mAH non-rechargeable battery)
Operating temperature: -20 ~ + 60℃

Class 1 Noise Pollution Sensor

Class 1 measurement accuracy according to IEC 61672-1
LAeq 1min/1s
Uninterrupted 24/7 measurement
LoraWan communication
Battery powering and solar panel powering also available
Protection against external agents with IP65 outdoor kit
Light weighted, small sized and easy to install

Sensor for Electrical Cables

This is a split-core LoRaWAN® smart current transformer designed for the remote measurement of current levels, expressed in ampere. It simplifies the analysis of energy usage, as it reports the amount of accumulated ampere-hours, and it can be installed in any existing circuit, with no need to rewire your application. With the selection of 100A and 300A current detection ranges, it meets the specific energy monitoring requirements in several scenarios.

It is designed to get its power supply directly from the circuit it measures, thus removing restrictions connected to batteries and ensuring seamless operation.

It boasts an outstanding sampling frequency up to 3.3 kHz, ensuring unmatched accuracy and detail.